Posts

Since 2024

Page not found

Statamic 5 is released!

The Statamic team released Statamic 5 this week. This major release focuses on performance improvements, developer experience, and continued modernization of the code base. The announcement post goes into greater detail about performance, but for large, complicated sites, you might see anywhere from 50-600% speed increases. Small sites might notice a bump of 5-10% faster. With Statamic 5, the control panel has multi-site management, where non-technical (and technical alike) users can add, edit, and remove sites: Multi-site management in the control panel When using the flat file Stache driver, you can now see the equivalent of what SQL queries would be with the flat file fake SQL queries panel. You can now see approximated SQL queries in tools like Laravel Debugbar, Telescope, and Ray: Approximated SQL with the flat file driver Statamic 5 also supports Laravel 11, including integration of Laravel Prompts in the CLI and support for Reverb. With support for Laravel 11, Laravel 9 and PHP 8.0 support were dropped from v5. Other New Features and Changes Laravel 11 support Dropped support for Laravel 9 and PHP 8.0. * Sites can be managed in the control panel. Approved sites may use offline license validation. Laravel Reverb support Ability to fake SQL queries for the Stache. Ability to install first-party addons using install:eloquent-driver, install:ssg, and install:collaboration commands. The "default" values set on blueprint fields is now used across the board rather than only in the publish form. Glide URLs now always contain the original filename for better SEO. * The Glide "hash" in its URLs can be customized. * Addon test suite is included as part of the make:addon command. New syntax for escaping Antlers inside tag parameters. Ability for forms to have temporary files used as email attachments. Added pluck to the query builder. Form submissions have been upgraded to a full repository and query builder. * The form submission listing in the control panel can be filtered. Entries etc are now JSON-serialized where appropriate. The GraphQL editor in the control panel (GraphiQL) has been updated and given a facelift. Tokens can be stored elsewhere, like a database. Statamic is open-source and free to use within the limits of the Solo license. The Pro license is $275. More details about the licensing and pricing can be found on Statamic's pricing page. For full more details about Statamic 5, head over to the official announcement blog post on statamic.com. You can also find the open source release on GitHub. The post Statamic 5 is released! appeared first on Laravel News. Join the Laravel Newsletter to get Laravel articles like this directly in your inbox.

Explore two ways to white label with Arduino Cloud

We’re excited to announce a brand-new feature called “Custom Branding,” which allows Enterprise plan users to white label their workspace and enhance the overall user experience. This announcement is exciting because it empowers businesses to create a truly tailored environment within the Arduino Cloud platform, reflecting their brand identity and providing a cohesive experience for […] The post Explore two ways to white label with Arduino Cloud appeared first on Arduino Blog.

ArdEEG is an Arduino UNO R4 WiFi shield for measuring biosignals

The secrets to most of the mind’s mysteries may still elude us, but we’ve made a tremendous amount of progress in reading signals produced by the brain. We may not understand exactly what is going on, but we can see the result and utilize it. And now you can start exploring biosciences and experimenting with brain-computer interfaces […] The post ardEEG is an Arduino UNO R4 WiFi shield for measuring biosignals appeared first on Arduino Blog.

Use Vue or React Components in a Livewire App with MingleJS

MingleJS is a helper for using Vue and React components in a Livewire or Filament application. Created by Joao Patricio, this package is useful for landing pages and complex components where you want to use Vue or React. It can also be used as an incremental way to adopt Livewire or utilize third-party components in the Vue or React ecosystem. MingleJS Demo Component MingleJS works by rendering a <div> on the server side and then mounts a component on the client side. A server-side Livewire component renders each JS component, so you get JavaScript interactivity on the front end that is isolated to your Livewire component. Additionally, the backend can pass data to the component available on the front end. namespace App\Livewire; use Ijpatricio\Mingle\Concerns\InteractsWithMingles; use Ijpatricio\Mingle\Contracts\HasMingles; use Livewire\Component; class ChatApp extends Component implements HasMingles { use InteractsWithMingles; public function component(): string { return 'resources/js/ChatApp/index.js'; } public function mingleData() { return [ 'message' => 'Message in a bottle 🍾', ]; } // ... } A mingle includes a Livewire component that uses the InteractsWithMingles trait, a glue JavaScript file, and the frontend component file. Here's an example of what the Mingle component might look like using React: // resources/js/ChatApp/index.js import mingle from '@mingle/mingleReact' import ChatApp from './ChatApp.jsx' mingle('resources/js/ChatApp/index.js', ChatApp) // resources/js/ChatApp/ChatApp.jsx import React from 'react' function ChatApp({wire, ...props}) { const message = props.mingleData.message console.log(message) // 'Message in a bottle 🍾' wire.doubleIt(2) .then(data => { console.log(data) // 4 }) return ( <div> {/*  */} </div> ) } export default ChatApp Learn More To get started with MingleJS, head over to the MingleJS documentation. The author of MingleJS has also provided an open-source MingleJS demo app, and a live demo if you want to kick the tires. The post Use Vue or React Components in a Livewire App with MingleJS appeared first on Laravel News. Join the Laravel Newsletter to get Laravel articles like this directly in your inbox.

Expanding possibilities: Blues Wireless amplifies Opta’s connectivity

Blues Wireless and Arduino have joined forces to create the game-changing Blues Wireless for Arduino Opta, unveiled this week at the Automate Show in Chicago. The expansion module is an affordable solution to enhance connectivity options for Arduino Opta micro PLCs, and marks a significant milestone in PLC technology and in making technology more easily […] The post Expanding possibilities: Blues Wireless amplifies Opta’s connectivity appeared first on Arduino Blog.

Rule::array() and whereJsonOverlaps() for MySQL in Laravel 11.7

This week, the Laravel team released v11.7, with a Rule::array() validation method, a whereJsonOverlaps() method for MySQL, a Slack OpenID provider for Laravel Socialite, and more. Introduce the Rule::array() Method Jakub Potocký contributed the Rule::array() method used to validate multiple array keys using the array validation rule. This method enables using this rule with arrays and collections without having the concatenate dynamic values: use Illuminate\Validation\Rule; // Before ['array:' . MyBackedEnum::VALUE->value . ',' . MyBackedEnum::VALUE_2->value]; // After examples Rule::array('key_1', 'key_2', 'key_3'); Rule::array(['key_1', 'key_2', 'key_3']); Rule::array(collect(['key_1', 'key_2', 'key_3'])); Rule::array([UnitEnum::key_1, UnitEnum::key_2, UnitEnum::key_3]); Rule::array([BackedEnum::key_1, BackedEnum::key_2, BackedEnum::key_3]); See Pull Request #51250 for full details. Stringable Support in blank() and filled() Helpers Stefan R. contributed support for Stringable values in the blank() and filled() helpers: // true filled(str('FooBar ')); // true blank(str(' ')); Add "whereJsonOverlaps()" for MySQL Benjamin Ayles contributed support for MySQL's json_overlaps feature that compares two JSON documents: User::whereJsonOverlaps('languages', ['en', 'fr'])->exists(); User::whereJsonDoesntOverlap('languages', ['en', 'fr'])->exists(); See Pull Request #51288 for more details and discussion. Add PasswordResetLinkSent Event Matt Jones contributed a new event called PasswordResetLinkSent which fires when a password reset link is sent. See Pull Request #51253 for more details. Laravel Socialite Provider for Slack OpenID Maarten Paauw contributed a separate Slack OpenID provider for Laravel Socialite. See Pull Request #704 for details and links to the Slack documentation. Release notes You can see the complete list of new features and updates below and the diff between 11.6.0 and 11.7.0 on GitHub. The following release notes are directly from the changelog: v11.7.0 [11.x] Fix SesV2Transport to use correct EmailTags argument by @Tietew in https://github.com/laravel/framework/pull/51265 [11.x] Add Databases nightly workflow by @Jubeki in https://github.com/laravel/framework/pull/51218 [11.x] update "min" and "max" rule comments by @browner12 in https://github.com/laravel/framework/pull/51274 [11.x] Fix namespace and improvement PSR in ClassMakeCommandTest.php by @saMahmoudzadeh in https://github.com/laravel/framework/pull/51280 [11.x] improvement test coverage for view components. by @saMahmoudzadeh in https://github.com/laravel/framework/pull/51271 [11.x] Introduce method Rule::array() by @Jacobs63 in https://github.com/laravel/framework/pull/51250 [11.x] Fix docblock for collection pluck methods by @SanderMuller in https://github.com/laravel/framework/pull/51295 [11.x] Add tests for handling non-baked enum and empty string requests by @hrant1020 in https://github.com/laravel/framework/pull/51289 blank and filled now support stringable by @lava83 in https://github.com/laravel/framework/pull/51300 [11.x] Fix ratio validation for high ratio images by @ahmedbally in https://github.com/laravel/framework/pull/51296 [11.x] Add int|float support to e method by @trippo in https://github.com/laravel/framework/pull/51314 [11.x] Add release notes by @driesvints in https://github.com/laravel/framework/pull/51310 [11.x] Stringable is also an interface of symfony by @lava83 in https://github.com/laravel/framework/pull/51309 [11.x] Add some tests and improvement test coverage for Str::camel by @saMahmoudzadeh in https://github.com/laravel/framework/pull/51308 [11.x] Using the ?? Operator (Null Coalescing Operator) by @saMahmoudzadeh in https://github.com/laravel/framework/pull/51305 [11.x] Add ability to override the default loading cached Routes for application by @ahmedabdel3al in https://github.com/laravel/framework/pull/51292 [11.x] Add ->whereJsonOverlaps() for mysql by @parkourben99 in https://github.com/laravel/framework/pull/51288 [11.x] Add InteractsWithInput methods to ValidatedInput by @aydinfatih in https://github.com/laravel/framework/pull/51316 [11.x] Adding PasswordResetLinkSent event by @Muffinman in https://github.com/laravel/framework/pull/51253 The post Rule::array() and whereJsonOverlaps() for MySQL in Laravel 11.7 appeared first on Laravel News. Join the Laravel Newsletter to get Laravel articles like this directly in your inbox.

This Arduino-controlled machine dispenses the perfect bowl of cereal

Breakfast cereal is controversial. Milk or cereal first? Best cereal to milk ratio? Favorite cereal? Most attractive mascot? The opportunities for debate never end. But we can all agree that consistency is key when it comes to the milk:cereal ratio — nobody changes that up from day to day. To ensure that every pour is […] The post This Arduino-controlled machine dispenses the perfect bowl of cereal appeared first on Arduino Blog.

Optimize Your Eloquent Queries with AI

The Laravel Slower package is designed for Laravel developers who want to enhance the performance of their applications. This package identifies slow queries and suggests optimizations such as indexing and other improvements. Depending on how you configure your application's scheduler, you could run the following commands each day to analyze and clean up old records: php artisan slower:clean /*{days=15} Delete records older than 15 days.*/ php artisan slower:analyze /*Analyze the records where is_analyzed=false*/ Recommendations created with the slower:analyze command are stored in the database table created by this package, which you can review after AI analysis is completed. As part of the AI analysis, this package's main features include: A configurable slow threshold Configurable AI models like Chat GPT-4 Disable AI and only log slow queries Configurable prompt for AI Disable slow query analysis The README includes an example analysis to help you visualize what you can expect with this package: /* select count(*) as aggregate from "product_prices" where "product_id" = '1' and "price" = '0' and "discount_total" > '0' */ dd($model->recommendation); /* Indexing: Effective database indexing can significantly speed up query performance. For your query, consider adding a combined (composite) index on product_id, price, and discount_total. This index would work well because the where clause covers all these columns. */ /* CREATE INDEX idx_product_prices ON product_prices (product_id, price, discount_total); */ You can learn more about this package, get full installation instructions, and view the source code on GitHub. The post Optimize Your Eloquent Queries with AI appeared first on Laravel News. Join the Laravel Newsletter to get Laravel articles like this directly in your inbox.

Assess your aquarium’s health with an AI-enabled ultrasonic sensor

Below the surface of any body of water, harmful amounts of toxic gases and contaminates can accumulate, which leads to a loss in fish and plant populations if not fixed quickly. But because most water testing, especially in aquariums, is done primarily on the surface, vital information gets missed. Kutluhan Aktar’s automated testing system aims to address […] The post Assess your aquarium’s health with an AI-enabled ultrasonic sensor appeared first on Arduino Blog.

Build Your SaaS In Days With SaaSykit

SaaSykit is a feature-rich Laravel SaaS boilerplate that helps you build and launch your SaaS application in days instead of months. SaaSykit is a robust framework that includes everything needed to run a modern SaaS. It help your launch fast, iterate on your SaaS ideas quickly, save time and effort, and focus on implementing your core SaaS features instead of reinventing the wheel by building every component from scratch to run your SaaS. SaaSykit features in a nutshell: 💰 Payment provider integration (Stripe, Paddle & Lemon Squeezy) 💻 Easy product, plan, discount and pricing management 👩 Stunning admin panel and user dashboard (powered by FilamentPHP) 🚪 Beautiful checkout process 🗓️ Ready-to-use components (hero sections, features, testimonials, and more) 🥑 Built-in user authentication and social login (Google, Facebook, X, and more) 📈 SaaS metric tracking in a beautiful dashboard 🎨 Customizable landing page styling for your branding 💌 Email templates and transactional emails 📝 Built-in Blog 🚧 Integrated Roadmap 🧒 User / role management 🌍 Fully translatable and SEO-optimized 🚀 One-line deployment and much more Building a SaaS has never been easier. Check out SaaSykit to know more. The post Build Your SaaS In Days With SaaSykit appeared first on Laravel News. Join the Laravel Newsletter to get Laravel articles like this directly in your inbox.

Introducing Opta Expansions: scalable simplicity!

Last year, we launched the Arduino Pro Opta: it was an instant success with our community, and allowed us to reach PLC engineers with a new solution specifically designed for their needs. To further expand Opta’s capabilities, today the Arduino ecosystem welcomes various expansions that allow you to add new I/Os in the simplest and […] The post Introducing Opta Expansions: scalable simplicity! appeared first on Arduino Blog.

Create your own affordable Arduino-powered smart glasses

When Google Glass launched in 2013, the public opinion seemed to be “interesting technology, but the world isn’t ready yet.” Now that more than a decade has passed, the world may finally be ready — especially with the omission of controversial features like video recording. If that appeals to you, then Akashv44 has a great […] The post Create your own affordable Arduino-powered smart glasses appeared first on Arduino Blog.

Monitoring the weather with an Arduino MKR WiFi 1010-based station

Being able to monitor the weather in real-time is great for education, research, or simply to analyze how the local climate changes over time. This project by Hackster.io user Pradeep explores how he was able to design a simple station outdoors that could communicate with a cloud-based platform for aggregating the sensed data. The board Pradeep selected is […] The post Monitoring the weather with an Arduino MKR WiFi 1010-based station appeared first on Arduino Blog.

Moonshine is an Open-source Admin Panel for Laravel

Moonshine is an open-source package for Laravel offering an admin panel you can use for MVPs, back-office applications, and content management systems. You can make an admin panel with authorization and CRUD in minutes. Moonshine Demo Admin Moonshine is a tool for rapid development using the package's CMS features, and other features that make you productive using familiar tools like Blade, Livewire, and Alpine: Moonshine helps you create functionality rapidly There is no binding to models; you can take whatever data you like Form and table builder Lightweight and easy to use AlpineJs Tailwind CSS and Blade, familiar to the vast majority of Laravel developers Ability to use Blade and Livewire components Convenient template builder, change colors and overall design To start with Moonshine, chect out the Installation guide. The documentation is another good place to start, along with the MoonShine 2 video guide. The post Moonshine is an Open-source Admin Panel for Laravel appeared first on Laravel News. Join the Laravel Newsletter to get Laravel articles like this directly in your inbox.

Galco goes Platinum! Welcome our newest SIPP

Founded in 1975 and headquartered in Madison Heights, Michigan, Galco is a leading e-commerce distributor that specializes in providing a wide range of industrial and commercial electrical and electronic products, focusing on maintenance, repair, and operations (MRO). Known for strong expertise in sourcing hard-to-find, high-quality products and guaranteeing exceptional customer service – including cross-referencing, free […] The post Galco goes Platinum! Welcome our newest SIPP appeared first on Arduino Blog.